Do you write test procedures from scratch?

Yes. We create complete test procedures including test objectives, equipment setup, step-by-step instructions, data collection requirements, acceptance criteria, and safety precautions. Procedures are written for ground test, flight test, environmental testing, and system integration testing.

Can you help with instrumentation selection?

Yes. We provide instrumentation specifications including sensor selection (type, range, accuracy), DAQ channel assignments, signal conditioning requirements, calibration procedures, and wiring diagrams. We work with common DAQ platforms including Dewesoft, NI, and others.

Do you provide on-site test execution support?

Yes, as an optional add-on. We can provide on-site engineering support during test execution including test setup verification, procedure walkthrough, data collection oversight, real-time troubleshooting, and preliminary data review.

What's the difference between this and Test Program Development?

Test Program Development focuses on high-level verification strategy and requirements mapping. Test Planning & Execution focuses on detailed test procedures, instrumentation specs, and execution support. Think of Test Program Development as the 'what and why' and Test Planning & Execution as the 'how and when'.

How long does it take to write test procedures?

Timeline depends on test complexity and number of procedures. A single ground test procedure typically takes 1-2 weeks. A full test campaign with multiple procedures (5-10 tests) typically takes 4-8 weeks. Flight test procedures take longer (2-3 weeks per procedure) due to safety requirements.

Do you provide test reports after execution?

Test report authoring is a separate service (Test Documentation & Reporting). This service focuses on test planning and execution support. However, we can provide preliminary data review and test summary reports as part of on-site execution support.

Can you design our test facility?

No. Test facility design is a separate service (Test Infrastructure & Lab Design). This service focuses on test procedure development and execution support for existing facilities. We can provide facility requirement recommendations, but detailed lab design is handled separately.

What standards do you follow for test procedures?

We write test procedures aligned with aerospace industry standards including ARP4754A (systems test), DO-160 (environmental qualification), and Part 25/27 (aircraft certification). Procedures include traceability to requirements, clear acceptance criteria, and compliance demonstration documentation.

Test Planning & Execution | Solrise Engineering

Test Programs That Don't Waste Time, Budget, or Credibility

We help aerospace and advanced mobility teams design test programs that generate the right data, satisfy certification requirements, and keep programs on track—without guessing what 'good enough' looks like.

Schedule Free Consultation See How It Works

Your Test Program Is Critical. Why Does It Feel Like You're Building the Plane While Flying It?

❌ "The Requirements Are Moving Targets"

You're designing test procedures while the design team is still finalizing requirements. Every change ripples through your test plan, and you're constantly playing catch-up.

❌ "Nobody Agrees on What 'Comprehensive' Means"

Engineering wants detailed characterization. Program management wants fast results. Certification wants proof of compliance. Your test matrix is trying to satisfy everyone and satisfying no one.

❌ "The Instrumentation Plan Is a Moving Target"

You're three weeks from test and still arguing about sensor placement, data acquisition rates, and which parameters actually matter for verification.

❌ "Test Execution Feels Like Controlled Chaos"

Test day arrives. Your procedures are 80% complete. Your setup isn't verified. Your data acquisition triggers aren't validated. And everyone's watching.

We Build Test Programs That Work the First Time

Structured Test Strategy

Not a generic template. A tailored test approach that maps your verification requirements to specific test types, sequences, and acceptance criteria—before you commit resources.

Instrumentation Plans That Make Sense

We define sensor types, locations, accuracy requirements, and data acquisition strategies based on what you're actually trying to prove—not vendor spec sheets.

Test Procedures That Technicians Can Follow

Clear, unambiguous procedures with setup instructions, safety checks, data collection steps, and acceptance criteria. No interpretation required.

Test Readiness Review Support

We prepare your Test Readiness Review (TRR) package, walk your team through readiness criteria, and ensure all stakeholders agree you're ready to execute—before you commit to test.

Test Execution Support

We don't disappear after planning. We're there during setup validation, dry runs, and test execution to troubleshoot issues and ensure data quality in real time.

The Process: From Requirements to Data Package

Requirements & Risk Assessment

(Week 1)

We review your verification requirements, design documentation, and test constraints. We identify high-risk areas, critical parameters, and gaps that will cause problems later.

Test Strategy & Instrumentation Planning

(Weeks 2-3)

We develop your test matrix, define test sequences, select instrumentation approaches, and create data acquisition requirements. You see exactly what will be tested and how.

Procedure Development & TRR Preparation

(Weeks 3-6)

We write detailed test procedures with setup diagrams, safety checks, step-by-step instructions, and data acceptance criteria. We prepare your Test Readiness Review package to ensure all stakeholders align before execution.

Execution Support

(Test Campaign)

We support setup validation, participate in dry runs, troubleshoot instrumentation issues, and verify data quality during test execution. You're not alone when things go sideways.

What You Receive

Test Strategy Document (requirements traceability, test approach, success criteria)

Test Matrix (mapping requirements to test cases)

Instrumentation Plan (sensor specifications, locations, DAQ requirements)

Detailed Test Procedures (setup, execution, data collection, acceptance criteria)

Setup Validation Checklist

Test Readiness Review (TRR) Package

Test Execution Support (on-site or remote, coordinated with your team)

Data Quality Verification

What This Service Covers

✅ What's Included

Understanding your test requirements and existing test articles
Developing test plans, procedures, and instrumentation strategies
Test Readiness Review preparation and support
On-site or remote execution support (from days to full campaigns)
Data quality verification and troubleshooting

❌ Not Included in This Service

Design of test apparatus, fixtures, or structural test rigs
Custom data acquisition software development
Long-term facility operations or maintenance

Need test apparatus design? That falls under our Test Infrastructure & Laboratory Design service.

This Service Is For You If...

You're running your first major test campaign and don't want to learn by failing

Your test program needs to satisfy Part 25, eVTOL certification, or other safety-critical system requirements

Your team has test experience but not in aerospace or safety-critical systems

You're setting up a new test program and need instrumentation and procedure development

Your previous test campaign had data quality issues or incomplete coverage

You need someone who's actually run ground and flight test programs before

We've Been in Your Seat

We've Actually Run These Programs

We're not consultants who read standards and write reports. We've designed test facilities, specified instrumentation, written procedures, and stood in test cells when things didn't go as planned. Recent work includes propulsion system verification testing with motor and inverter assemblies along with customized propellers.

We Know Your Standards

Part 25 aircraft programs, eVTOL regulatory pathways, propulsion system qualification. We know what certification authorities expect and how to structure test programs that satisfy their requirements.

We Speak Test Engineer

Strain gauges vs. accelerometers. DAQ sampling rates. Signal conditioning. Test matrix design. We know the language because we've done the job.

What It Takes

Typical Timeline

6-8 weeks from kickoff to test-ready procedures

Execution Support

Coordinated with your test campaign schedule—from a few days to full campaign duration

Investment

Determined during free consultation based on test complexity, number of test articles, and execution support requirements.

Let's Talk About Your Test Program

Free 30-minute consultation. We'll review your requirements, discuss your test challenges, and outline an approach that makes sense for your program.

Schedule Free Consultation